Everlux emergency conversion kits can convert ordinary lighting fittings into emergrncy luminaires. Thanks to its electrical ballast, Everlux controls the power output depending on the characteristics of the range of the luminaires which can be connected to the kit.

Thanks to its extremely compact dimensions, Everlux meets all installation requirements inside lighting fittings, trunkings, modules. Maintained and non-maintained operations are possible.

Kit Everlux (R6L and R8L) are designed for intelligent systems: by connecting the kit to the Activa module (local self-diagnosis) or to the Dardo module (remote self-diagnosis) the lighting fitting converts into an intelligent luminaire able to carry out automatic functional and duration tests.
The connection between the kit and the Activa or Dardo module is very easy: simply fix tha already wired connector in the kit.

Activa Module

The kit contains the microprocessor circuitry of our ACTIVA range of luminaires. By connecting the kit to the Activa module (local self-diagnosis) the lighting fitting converts into an intelligent luminaire with the same functions of the ACTIVA luminaires.
The device is able, therefore, to carry out automatic functional and duration tests. It checks the function of the fluorescent lamp and of the circuit every 7 days and checks the duration of the batteries every 3 months. The Activa module is fitted with a multicolour LED which indicates the test results: Green = ok, Red = fault.
The intelligent AUTOCHECK takes place immediately after installation and after battery replacement. By using the optional TELEUR remote control, the same used for inhibition, it is possible to:

Dardo Module

The kit contains the interface for the DARDO intelligent System. By connecting the kit to the DARDO module, the lighting fitting becomes an emergency luminaire which can be connected to the DARDOcontrol unit. The DARDO Intelligent System is able to control up to 192 lamps from each control unit and a maximum of 768 lamps from 4 control units. The control function of the DARDO system consists of a periodic automatic functional test (weekly) and a duration test (three-monthly) for each lamp which is connested to the DARDO. This allows you to identify any faulty fitting from one cantral position.